ATA 33-40, Logo Lights

More
6 years 1 month ago - 6 years 1 month ago #535 by Mark
ATA 33-40, Logo Lights was created by Mark
There are two logo lights installed on each side of the horizontal stabilizer. The inner light has a step-down transformer incorporated in the assembly. This transformer takes the 115VAC input down to 13VAC which is used by the lights themselves.



The outer light is wired across to the inner assembly's transformer for its 13VAC power.



Attachments:
Last edit: 6 years 1 month ago by Mark.

Please Log in or Create an account to join the conversation.

More
6 years 1 month ago - 6 years 1 month ago #536 by Mark
Replied by Mark on topic ATA 33-40, Logo Lights
Both lights will be inop if you pull the inner assembly and see "this".

Attachments:
Last edit: 6 years 1 month ago by Mark.

Please Log in or Create an account to join the conversation.

More
6 years 2 days ago #544 by jake ounce
Replied by jake ounce on topic ATA 33-40, Logo Lights
Well, we have logo lights on the 747-8s, and I'm sure they will find that!!

Please Log in or Create an account to join the conversation.

Time to create page: 0.655 seconds