ATA 29-11, MD-10-10 Engine Hydraulic Pump Verification

More
7 years 3 months ago #421 by Mark
We had just replaced the Hydraulic System Controller and completed the required tests. One final test was to run the engines to assure pump switching and operation.

Please Log in or Create an account to join the conversation.

More
7 years 2 months ago #434 by jake ounce
After engine start, both hyd pumps run then the HSC arms the left pump?

Please Log in or Create an account to join the conversation.

More
7 years 2 months ago #438 by Mark
Runs the left full time. If the left fails the right is armed to come on.

Please Log in or Create an account to join the conversation.

Time to create page: 0.815 seconds