- Posts: 969
- Thank you received: 143
Cessna Program Module
9 years 2 months ago - 9 years 2 months ago #129
by Mark
Cessna Program Module was created by Mark
Cessna ATC Program Module (no swapping of rack pins needed!!!!)
All that is needed is to set the dip switches to the binary code for the aircraft. Cessna's PDF leaves you to draw some extra lines on the right of chart for the #2 transponder, but using the example on the left helps out. Don't use the image..... download the PDF below.
I've also heard a similar module is used for the ELT.
All that is needed is to set the dip switches to the binary code for the aircraft. Cessna's PDF leaves you to draw some extra lines on the right of chart for the #2 transponder, but using the example on the left helps out. Don't use the image..... download the PDF below.
I've also heard a similar module is used for the ELT.
Last edit: 9 years 2 months ago by Mark.
Please Log in or Create an account to join the conversation.
Time to create page: 0.729 seconds
Don't have an account?
Register now to join the community!
©
2024
Rotate.Aero